• Pyramid PB442X 4 Channel 300W Car Audio Amplifier
• Four Channel Amplification
• 4x75 WattsTotal Output @ 4 Ohms
• Variable Gain Control/Remote Turn On/Off
• 4 Ohm Speaker Impedance
• Built-in Bass and Treble Control
• Gold Plated RCA Low Level Inputs
• S/N Ratio: Greater Than 85dB
• Frequency Response: 15-30k Hz
• Overload/Thermal/Short Circuit Protection
• Power On LED Indicator
• Automotive Type Fuse Protection
• Dimensions: 9.05"W x 2.32"H x 10.63"D
1000 Watts x 4 Output 2000 Watts x 2 idged Output ( 1000W x 2 + 2000W x 1) Dual Variable Hi/Lo Electronic Crossover Network Dual Variable Bass Boost Dual Variable Input Level (Gain) Control Power ON LED Indicator Protection LED Indicator Remote Bass Boost Hi/Lo Impedance Input Blue Light Illumination Top Cover Thermal / Overload / Short Circuit Protection Anti-Thump Turn-On Tri-Mode Configurable Dimensions: 2.4-Inch H x 10.8-Inch D x 17-Inch L
10 Band Graphic Equalizer12dB Boost/Cut Power On/Off Defeat 2 Channel High Power Amplification 2 or 4 Speaker Hook up 300 Watts Rated Power Built in Heavy Duty Heatsinks Dual LED Power Meter Display Ratary Fader/Slide Volume Control Night Illumination Around all Controls Input Impedance: High 47k Ohm via RCA Jacks Low Input 100 Ohm Common or Floating Ground Hook up Frequency Response: 20-20kHz Output Impedance: 4-8 Ohms Dimensions: 6.25-Inch D x 6.75-Inch W x 2-Inch H
The Pyle Academy series is an affordable option to provide high-power, high-quality sound to your vehicle’s speakers. Academy amplifiers are sturdy with amp heatsinks and accept both low level RCA inputs as well as high-level, low-impedance MOLEX inputs. So you can rock your tunes no matter what kind of head unit you have. The PLAM1600 is a four-channel, 1600-watt bridgeable amplifier. It’s equipped with variable gain control, a built-in variable subwoofer crossover, and a three-way configuration. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. Welcome to the academy – the Pyle Academy.
300W 2-Channel Bridgeable Amplifier
20ft 8 Gauge Red Power Wire4ft 8 Gauge Black Ground Wire 17ft Right Angle RCA Interconnect Audio Cable 3ft Black Split Loom Cable Conduit 60A MAXI Type Nickel Plated Fuse MAXI In-line Fuse Holder 2 Ring Terminals: 8 G 2 Spade Terminals: 8 G 2 Butt Connectors 10 Cable Ties
This Pyle Link kit has everything you need to get started installing a new head unit and speakers in your car! Comes with a variety of wires: a 20 ft. 8-gauge red power wire, 4 ft. 8-gauge black ground wire, 20 ft. 16-gauge blue remote turn-on wire, 20 ft. 12-gauge stereo speaker wire, 20 ft. stereo RCA audio cable (male-to-male) and a 6 ft. black split loom cable conduit. Also includes 2 8G ring terminals, 2 8G spade terminals, 5 14-16G spade terminals, 3 butt connectors, 20 cable ties, and 1 black grommet.
1000W x 4 Output @ 2 Ohms2000W x 2 bridged Output @ 4 Ohms 1000W x 2 @ 4 Ohms + 2000W x 1 Output @ 2 Ohms 2 Ohm Stable Dual MOSFET Power Supplies Dual HIGH/LOW/FULL X-over Switch Dual Variable Hi-Pass : 40 Hz-250 Hz Dual Variable Low-Pass : 40 Hz-250 Hz Dual Variable Input Level (Gain) Control : 6V-200mV Dual Switchable Bass Boost : 0/+18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x50 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.74''W x1.69''H x17''L
1000W x 2 Output @ 2 Ohms 2000W x 1 bridged Output @ 4 Ohms 2 Ohm Stable MOSFET Power Supply High/Low/Full Crossover Switch Variable Hi-Pass : 40 Hz-250 Hz Variable Low-Pass:40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Bass Boost Selector : 0/+18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x40 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63''W x1.75''H x 12''L
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool – it’s completely waterproof. This 2-channel, 400-watt bridgeable marine amp takes both high and low level inputs, so it’s compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Remote turn/on off makes controlling this amp a breeze. Gold plated RCA inputs means this amp won’t be a weak link in your setup. For protection, count on the heavy duty aluminum alloy heatsink to prevent overheating, as well as thermal, overload, and short circuit protection. Comes complete with mounting screws and hardware. Runs on 12 volts DC.
Top Search
Last Search
