Max Bass Control Dash Mount Remote Control Bass Restoration Lighted Display PWM High Head Room Power Supply Frequency Response: 10Hz - 100KHz Balance Input Noise Rejection: 60dB Parametric Bass Control PFM Subsonic Filter Balanced Inputs Bass Output Control Output Level: 13.5 Volt THD: 0.003% Dimensions : 4.60"W x 1.45-InchH x 7.30-InchL
.5M 2-channel S-series signal cable with dual twisted-pair conductors to eliminate induced noise & interference.
Constant Q Circuitry with a 3% Center Frequency AccuracyVariable Input Level Controls Dual Blue LED Level Meters Variable Meter Sensitivity Post/Pre Switch Source Selector Red Illuminated Power Switch Line 1/Line 2 & Tape RCA Inputs Line and Tape RCA Outputs Ground/Lift Switch Rack Mountable 110/220 Voltage Switchable Dimensions: 19'' x 5.2'' x 7.4''
Want to maximize the performance of your external amplifiers? The Eclipse EQ1000 equalizer/crossover boosts and contours the signal from your in-dash receiver before sending it to the amplifier(s), reducing system noise and increasing dynamic range.
Six bands of equalization allow you to boost or cut specific frequencies (up to 12 dB) so you can fine tune system performance. Each band has a control which moves its center frequency up and down to target the portion of the music you wish to control (Band 1: 25-100 Hz (Parametric) Band 2: 250 Hz; Band 3: 600 Hz; Band 4: 1.5 kHz; Band 5: 4 kHz Band 6: 10 kHz).
You can attach your receivers preamp outputs to the Eq1000's first set of inputs and hook up a second source (iPod, MP3 player, DVD Player etc.) to the second set of inputs - separate gain controls allow you to match the levels of both sources.
Other features include a left-to-right fader and subwoofer control. The EQ1000 features Parametric center frequency control (for subwoofer), Parametric "Q" Control (Width of the subwoofer frequency equalization band) and subwoofer level control. It also features an extra full range mono output. This attractive 1/2-DIN size equalizer can be installed in (or under) your dash.
* Parametric equalizer/crossover allows an system to achieve a smooth, accurate sound
* Retractable Knobs for Easy Access to each Fader, Frequency, Level and Q Control and Precise Adjustment
* Master gain and defeat switch
* Front Panel A/B Input Selection
* High-Pass and Low-Pass Filters for Front & Rear Channel and Subwoofer Output
* Adjustable 0 to 4 sec. turn on delay
* Input Level Control
* Gold-Plated RCA Jacks
* Front/rear fader
* 5-Band Graphic EQ
* 1-Band Parametric EQ
* Subsonic and low/high pass filters
* Subwoofer crossover control
* FR-4 (Military-Spec) Anti-Vibration Circuit Boards
CHASSIS DIMENSIONS:
7 1/8" X 11 7/8" X 1 5/8"
(180MM X 300MM X 41MM)
Blue Light Illuminated Control Panel Removable Covers For Power and Input/Output Ports Rotary Control Knobs 12dB Per Octave Crossover Slopes PWM Power Supply Remote Bass Boost (0-+18dB) and Level Controls Subwoofer Mode Switch Variable High-Pass Frequency Control 40-8 kHz Parametric -InchQ-Inch Control (2-20) Left and Right High Pass Phase Shift Control (0-180) High-Pass Level Control Subwoofer Level Control Frequency Multiplier (x1, x10 High-Pass Crossover) Subwoofer Stereo/Mono Mode Control Frequency Multiplier (x1, x10 Subwoofer Crossover) Variable Subwoofer Frequency Control 40-8 kHz Variable Bass Boost Frequency Control 25-250 Hz Sub High RCA Inputs Sub High Pass Outputs Line Out Variable Output Level Controls, 7 Volts Dimensions : 6"W x 1.75-InchH x 11.69-InchL
In the words of WAR, “All my friends know the LOWRIDER…” This could ring true for you, too, once you install the Sound Storm Laboratories L20 Lowrider Bass Generator. The Lowrider Bass Generator is an inexpensive way to enhance the low, even subsonic bass frequencies sent by your source unit – essentially allowing you to achieve Maximum Bass from your system of amplifiers and subwoofers. With a remote gain knob, you can control the thunderous bass with nothing but your fingertips. You can even recover some of the subsonic frequencies generally lost in MP3-style file formats. For technical questions about this product please visit our website, www.soundstormlab.com, or call a technician at 888.38.STORM. Let us prove to you that when it comes to building an impressive and affordable home-quality theater in your vehicle, Sound Storm is your mobile entertainment solution…and everything else is just noise.
7 Band Preamp Equalizer with Subwoofer Output, Master Volume Control
This in-dash, half-DIN, 4-band parametric equalizer with subwoofer control can be mounted in your car or used independently. Takes two sets of RCA inputs and outputs stereo front and rear, as well as a subwoofer output – so this signal processor also functions as a crossover network. The rotary faders give you complete control over the input gain, main output volume control, subwoofer frequency, subwoofer output control, and each of the four bands. Blue light illumination means this unit won’t just make your music sound great – it looks great, too. Mounting hardware and a 1 ft. 3.5mm to RCA converter included.
Half DIN Size Output Volume Control Input Gain Adjustments Sub Output Frequency and Gain Controls Rotary Fader Control 5 Band Graphic Equalizer 5 Band Parametric Control 20 Total Frequency Band Selector Defeat Switch Remote Power On/Off 10 dB Boost/Cut Full Night Illumination Rotary Band Control 6 Channel RCA Outputs Pre-Amp Line & Aux Inputs via RCA Jacks Fully Isolated DC to DC Power Supply Signal to Noise Ratio: 90dB Frequency Response: 15Hz 30kHz Dimensions: 1H x 7W x 5.5D
Top Search
Last Search
