Found 68 Pyle Speakers Audio Video Car Electronics Products.
Blue CD Wave Electro-Plated Cone Wide Butyl Rubber Surround w/New Pattern Blue steel Basket Bumped Vented Extended Pole Piece 2-Inch High Tempreture Kapton Voice Coil 4 Ohms Impedance 90 oz. Magnet Structure 800 Watts Peak Power Fs:26.2, Qms:5.81, Qes:0.90 Qts:0.78,Vas (Cu ft)4.146 SPL: 85.5dB Overall Diameter: 12.20-Inch Mounting Depth: 5.34-Inch
This Pyle Link line out converter takes a takes a low-level input and converts it to a high-level input and converts it to a high-level RCA output. Adjust the levels using the built-in control. Ground loop isolation and noise elimination smoothes out your signal for output to an amplifier. Aluminum housing keeps your equipment safe. Max input 50 W.
Get in gear with the Pyle Gear series! These speakers are designed to provide the best quality sound for the budget-minded enthusiast. These 4” x 6”, two-way speakers have 180 watts of pure power, supported by a 0.5” neodymium dome tweeter for sweet highs and high temperature voice coil for rich mids. The non-fatiguing butyl rubber surround and yellow-color poly-injected cone provide a sturdy foundation for keeping your sound crystal clear and distortion-free. The 30 oz. magnet structure allows these speakers to achieve a frequency response of 70 Hz to 20 kHz. To boost performance, these speakers have been equipped with a strong capacitor, meaning your speakers will never struggle for power. These speakers look cool, too, thanks to the yellow coated steel basket. Includes custom grills, wires, and installation hardware. You’ll hear everything you were meant to hear with Pyle Gear.
Get in gear with the Pyle Gear series! These speakers are designed to provide the best quality sound for the budget-minded enthusiast. These 6.5”, three-way speakers have 280 watts of pure power, supported by a super film tweeter for sweet highs, 0.5” neodymium dome for mids, and a high temperature voice coil to round out the low end. The non-fatiguing butyl rubber surround and yellow-color poly-injected cone provide a sturdy foundation for keeping your sound crystal clear and distortion-free. The 40 oz. magnet structure allows these speakers to achieve a frequency response of 60 Hz to 20 kHz. To boost performance, these speakers have been equipped with a strong capacitor, meaning your speakers will never struggle for power. These speakers look cool, too, thanks to the yellow coated steel basket. Includes custom grills, wires, and installation hardware. You’ll hear everything you were meant to hear with Pyle Gear.
High Power 50W Maximum Power Amplifier Five (5) 3/4-Inch Forward Mount Full Range Audio Two (2) 1-Inch Rear Mount Mid-Bass Response Mounting ackets Hardware Included The Compact 1/2 Din Design Allows For Indash Mounting 5.1 Surround Sound Audio Speaker Amplifier Specs: Continuous Power Output: 25W Peak Power Output: 50W Frequency Response: 200 Hz To 28K Hz. Power Supple Voltage: 10.8V To 15.6V Current Consumption: 3A Dimensions: 1.75-Inch (H) X 3.5-Inch(W) X 5.75-Inch (L) Weight: 1Lb Speaker Box Specs: Five (5) 3/4-Inch FowardMount Full Range Audio Two (2) 1-Inch Rear Mount Mid-Bass Response Dimensions: 1.125-Inch (H) X 6.75-Inch(W) X 6.5-Inch (L) Weight: 0.55Lb
Get in gear with the Pyle Gear series! These speakers are designed to provide the best quality sound for the budget-minded enthusiast. These 3.5”, two-way speaker have 120 watts of pure power, supported by a 0.5” neodymium dome tweeter for sweet highs and high temperature voice coil for rich mids. The non-fatiguing butyl rubber surround and yellow-color poly-injected cone provide a sturdy foundation for keeping your sound crystal clear and distortion-free. The 20 oz. magnet structure allows these speakers to achieve a frequency response of 100 Hz to 20 kHz. To boost performance, these speakers have been equipped with a strong capacitor, meaning your speakers will never struggle for power. These speakers look cool, too, thanks to the yellow coated steel basket. Includes custom grills, wires, and installation hardware. You’ll hear everything you were meant to hear with Pyle Gear.
This universal mount DVD player has a ton of features. It doesn’t just play DVD - it also handles VCD, CD, CDR, and MP3 CDs. It’s also equipped with a USB port and SD card slot to play MP3s and MPEG-4 video. It’s great on the road, since it runs on 12 V DC and has an anti-shock mechanism to handle bumpy roads. It’s easily mountable on the floor or underneath the dash. Hook the standard RCA outputs into a monitor and amplifier, or use the Dolby Digital coaxial out to a digital receiver. Includes a wireless remote to control play/pause, ESP function, mute, and repeat/random options.
Get in gear with the Pyle Gear series! These speakers are designed to provide the best quality sound for the budget-minded enthusiast. These 4” x 6”, three-way speakers have 180 watts of pure power, supported by a super film tweeter for sweet highs, 0.5” neodymium dome for mids, and a high temperature voice coil to round out the low end. The non-fatiguing butyl rubber surround and yellow-color poly-injected cone provide a sturdy foundation for keeping your sound crystal clear and distortion-free. The 30 oz. magnet structure allows these speakers to achieve a frequency response of 70 Hz to 20 kHz. To boost performance, these speakers have been equipped with a strong capacitor, meaning your speakers will never struggle for power. These speakers look cool, too, thanks to the yellow coated steel basket. Includes custom grills, wires, and installation hardware. You’ll hear everything you were meant to hear with Pyle Gear.
Pyle’s Hydra series speakers are waterproof and designed for use in your boat, on the dock, by the pool, or simply mounted outside. They’re designed with rust-proof mesh covers for quality protection. The PLMR61B is a pair of 120-watt, 6.5” two-way, full-range speaker suitable for marine use. These black speakers are equipped with a polypropylene cone with cloth surround and 1” aluminum voice coil for accurate sound reproduction. The molded ABS plastic basket keeps your sound distortion-free. Package includes mounting hardware and wires.
Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear. Pyle Drivers are all manufactured with a close attention to detail, and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Pyle Midrange / Tweeter Compression Drivers are second to none, and feature solid construction and accurate power handling ratings.
Top Search
Last Search
